Bluetooth 5.0 2-in-1 Receiver Transmitter

Item No.: X2
Bluetooth 5.0 Receiver/Transmitter, wired instantly becomes wireless.Solve speakers, cars, TV computers, projectors and other devices without bluetooth function, to achieve bluetooth wireless transmission.
Description Instruction Video


Item specifics:

   Sound Track:Double    Interface:3.5mm
   WIFI Standard:None    Wireless Type:Bluetooth
   High Definition Support:None    Content:AUDIO
   Package:Yes    Feature:None
   Support AAC:Yes    Model Number:MG-X2
   Support Memory Card:No    Support Apt-x:Yes
   Working time:4-5    Bluetooth Version:5.0
   Bluetooth protocol:aptX, aptX Low Latency, atpX HD    Working distance:10 meters
   Function 2:Bluetooth Receiver    Function 1:Bluetooth Receiver Transmitter  
   Function 4:Bluetooth Adapter for Headphones    Function 3:Bluetooth Transmitter
   Function 6:Wireless Adapter for TV    Function 5:Wireless Transmitter

Features the highest version Bluetooth V5.0 and the high-end CSR8675 chip to provide the best transmission efficiency, stability and ultra-low power consumption. Support AptX HD and AptX Low Latency, boasting high fidelity CD quality stereo sound streams seamlessly. It is the best choice if you’re looking for a cost-effective bluetooth audio receiver &transmitter.

TX Mode: connect bluetooth transmitter to audio output devices, such as TV, iPod or PC, You can enjoy ultra fast, high-fidelity audio from your bluetooth headsets, headphones or speakers flexibility. RX Mode: make your old home stereo system Bluetooth-enable and rejuvenate again. Bypass Mode (wired): you no longer need to plug/unplug any wires, easily switch it to other two modes.

Support Dual Stream in TX Mode and Multi-Point Connection in RX. Pair with two bluetooth headphones/speakers to double the fun. Or connect two smart phones at the same time. We suggest to pair two same brand audio receiving devices to achieve AptX Low Latency.

1 in 2 out function operation on TX Mode:
1. Connect any one of your BT device first, then turn off the “X2”, press and hold for 4 seconds to enter the pairing mode. At this time, make the second device enter the pairing mode. After the pairing is successful, the two devices will simultaneously receive the transmitted audio (the sound gradually increases).
2. Connect one of your BT device first, then turn it off, then connect the second device. After the second connection is successful, immediately open the first device. The sound of the two devices gradually increased and the connection was successful.

TWS function operation on RX Mode:
1. Turn on the two “X2”. After booting, press and hold the auxiliary button for 2 seconds to enter the TWS pairing mode (green flashing). Then turn off any “X2” and press and hold for 4 seconds to enter the pairing mode and connect with the Bluetooth devices such as mobile phone etc. after connection succeeded, Both “X2” can hear audio from mobile phones.
2. “X2” has been connected to a Bluetooth device such as a mobile phone. Press and hold for about 3 seconds to open another “X2”. Then press and hold the auxiliary button for two seconds (the green light flashes quickly). At this time, press and hold the connected “X2” auxiliary button for 2 seconds to enter the TWS pairing mode. After the pairing is successful, both of them will receive the audio transmitted by the mobile phone through Bluetooth.
Under TWS, both “X2” button controls are active (play/pause)